Devices

top of page

Kiwire 3.0 Administrator - Device & Controller Setup Guide

Kiwire 3.0 Administrator - Device & Controller Setup Guide

Cambium Networks Configuration for Kiwire Hotspot

Cambium Networks Configuration for Kiwire Hotspot

Prerequisites

Before integrating the controller with Kiwire, it is necessary that the controller and access point:

are connected to the Internet
are reachable on the network
have an IP address assigned to the a through DHCP or static

Note:

Kiwire-hostname or Kiwire-ip can be obtain by contacting our technical support for our cloud customer. For enterprise client the ip will be on premises Kiwire ip address.
Social network hostname list can be obtained from Social network whitelist guide

Part 1: Cambium cnMaestro configuration

Login to your Cambium cnMaestro controller

Go to WLANs > Configuration > AAA Servers
1. Authentication Server
  1. Host: Kiwire-hostname or Kiwire-Ip
  2. Secret: create a secret pass phrase
  3. Port: 1812
  4. Timeout: 3 seconds
  5. Attempts: 1
2. Accounting Server
  1. Host: Kiwire-hostname or Kiwire-ip
  2. Secret: secret same as authentication server
  3. Port: 1813
  4. Timeout: 3 seconds
  5. Attempts: 1
  6. Accounting Mode: Start-Interim-Stop
  7. Accounting Packet: ticked
  8. Interim Update Interval: 1800 seconds
3. Advanced Settings
  1. NAS-Identifier: AP MAC address with capital letters and colon
  2. Dynamic Authorization: ticked
  3. Dynamic VLAN: ticked
  4. Called Station ID: AP-MAC:SSID

Omaya 3.0 Administrator > Quick Setup > Dashboard

Documentation

KIWIRE DOCUMENTATION

All Documentation

Login & Dashboard

Captive Portal User Error

Device & Controller Setup

Equipment Comparison Chart

Devices - Project

The project module let you create project and restrict project based on the zones selected. The navigation menu listing will based on the...

Devices - NAS

A NAS are network gateway equipment that control user access to network, Kiwire is an advanced intelligent AAA with captive portal...

Devices - Introduction

The Device modules enables you to manage and monitor NAS (Network Access System) and network devices such as Wi-Fi controller, access...

Devices - Zone

The Kiwire zone module allow you to define zone that group devices and infrastructure setting to logical groups. Each zone can contain...

Devices - Monitoring

Kiwire is fully equipped with a built-in simple network monitoring system. This monitoring module will display all the equipment health...

bottom of page