Kiwire 3.0 Administrator - Device & Controller Setup Guide
Kiwire 3.0 Administrator - Device & Controller Setup Guide
Cambium Networks Configuration for Kiwire Hotspot
Cambium Networks Configuration for Kiwire Hotspot
Prerequisites
Before integrating the controller with Kiwire, it is necessary that the controller and access point:
-
are connected to the Internet
-
are reachable on the network
-
have an IP address assigned to the a through DHCP or static
Note:
-
Kiwire-hostname or Kiwire-ip can be obtain by contacting our technical support for our cloud customer. For enterprise client the ip will be on premises Kiwire ip address.
-
Social network hostname list can be obtained from Social network whitelist guide
Part 1: Cambium cnMaestro configuration
-
Login to your Cambium cnMaestro controller
-
Go to WLANs > Configuration > AAA Servers
-
Authentication Server
-
Host: Kiwire-hostname or Kiwire-Ip
-
Secret: create a secret pass phrase
-
Port: 1812
-
Timeout: 3 seconds
-
Attempts: 1
-
-
Accounting Server
-
Host: Kiwire-hostname or Kiwire-ip
-
Secret: secret same as authentication server
-
Port: 1813
-
Timeout: 3 seconds
-
Attempts: 1
-
Accounting Mode: Start-Interim-Stop
-
Accounting Packet: ticked
-
Interim Update Interval: 1800 seconds
-
-
Advanced Settings
-
NAS-Identifier: AP MAC address with capital letters and colon
-
Dynamic Authorization: ticked
-
Dynamic VLAN: ticked
-
Called Station ID: AP-MAC:SSID
-
-
Omaya 3.0 Administrator > Quick Setup > Dashboard
Documentation
Kiwire 3.0 API Documentation > User
Kiwire 3.0 API Documentation - User
Create
Use POST method to create new subordinate resources.
Example request URIs
[POST] https://{{kiwire_ip}}/api/user/
Parameters Required
PATCH
Use PATCH method is to make a partial update on a resource.
The differences between PATCH and PUT, PUT method also modify a resource entity but PATCH method is used for partially updating an existing resource. PUT should be used if you are entirety replacing a resource.
Example request URIs
[PATCH] https://{{kiwire_ip}}/api/user/{{id}}/ Parameters Required
delete
Use DELETE method as the name applies to delete resources.
Example request URIs
[DELETE] https://{{kiwire_ip}}/api/user/{{id}}/
get
Use GET method to retrieve resource information only and not to modify it in any way.
Example request URIs
[GET] https://{{kiwire_ip}}/api/user/ [GET] https://{{kiwire_ip}}/api/user/{{id}}/ [GET]
https://{{kiwire_ip}}/api/user/{{offset}}/{{limit}}/{{column}}/{{order}}/
NOTE:
For GET method, if {{offset}}, {{limit}}, {{column}}, and {{order}} not provided then Kiwire will return default value eg : https://{{kiwire_ip}}/api/user/0/10/id/desc/