Kiwire 3.0 Administrator - Device & Controller Setup Guide
Kiwire 3.0 Administrator - Device & Controller Setup Guide
Cambium Networks Configuration for Kiwire Hotspot
Cambium Networks Configuration for Kiwire Hotspot
Prerequisites
Before integrating the controller with Kiwire, it is necessary that the controller and access point:
-
are connected to the Internet
-
are reachable on the network
-
have an IP address assigned to the a through DHCP or static
Note:
-
Kiwire-hostname or Kiwire-ip can be obtain by contacting our technical support for our cloud customer. For enterprise client the ip will be on premises Kiwire ip address.
-
Social network hostname list can be obtained from Social network whitelist guide
Part 1: Cambium cnMaestro configuration
-
Login to your Cambium cnMaestro controller
-
Go to WLANs > Configuration > AAA Servers
-
Authentication Server
-
Host: Kiwire-hostname or Kiwire-Ip
-
Secret: create a secret pass phrase
-
Port: 1812
-
Timeout: 3 seconds
-
Attempts: 1
-
-
Accounting Server
-
Host: Kiwire-hostname or Kiwire-ip
-
Secret: secret same as authentication server
-
Port: 1813
-
Timeout: 3 seconds
-
Attempts: 1
-
Accounting Mode: Start-Interim-Stop
-
Accounting Packet: ticked
-
Interim Update Interval: 1800 seconds
-
-
Advanced Settings
-
NAS-Identifier: AP MAC address with capital letters and colon
-
Dynamic Authorization: ticked
-
Dynamic VLAN: ticked
-
Called Station ID: AP-MAC:SSID
-
-
Omaya 3.0 Administrator > Quick Setup > Dashboard
Documentation
Kiwire 3.0 Administrator > Devices & Configuration > Setting
Kiwire 3.0 Administrator - Devices & Configuration
Configuration - Setting
Setting module provide the general configurations of the Kiwire platform. This defines the overall behavior of Kiwire functionalities. This includes general setting, voucher setting, campaign setting and timezone setting for Kiwire platform. To access the setting module click on Configuration > Settings from the navigation.
General setting
The general setting manages the overall Kiwire configuration.
The field and its function description is listed below.
Voucher Setting
Voucher can be used for only one time in Kiwire system. Account that uses voucher is valid until the expiry due date or credit minutes is exhausted. Voucher setting provide general configuration for the voucher behavior.
The field and its function description is listed below.
Campaign Setting
Kiwire has a built in smart campaign built, use the configuration tab to set the overall behavior of Kiwire campaign modules.
The field and its function description is listed below.
Timezone Setting
The time zone setting screen let you set time zone configuration for the Kiwire platform.