Kiwire 3.0 Administrator - Device & Controller Setup Guide
Kiwire 3.0 Administrator - Device & Controller Setup Guide
Cambium Networks Configuration for Kiwire Hotspot
Cambium Networks Configuration for Kiwire Hotspot
Prerequisites
Before integrating the controller with Kiwire, it is necessary that the controller and access point:
-
are connected to the Internet
-
are reachable on the network
-
have an IP address assigned to the a through DHCP or static
Note:
-
Kiwire-hostname or Kiwire-ip can be obtain by contacting our technical support for our cloud customer. For enterprise client the ip will be on premises Kiwire ip address.
-
Social network hostname list can be obtained from Social network whitelist guide
Part 1: Cambium cnMaestro configuration
-
Login to your Cambium cnMaestro controller
-
Go to WLANs > Configuration > AAA Servers
-
Authentication Server
-
Host: Kiwire-hostname or Kiwire-Ip
-
Secret: create a secret pass phrase
-
Port: 1812
-
Timeout: 3 seconds
-
Attempts: 1
-
-
Accounting Server
-
Host: Kiwire-hostname or Kiwire-ip
-
Secret: secret same as authentication server
-
Port: 1813
-
Timeout: 3 seconds
-
Attempts: 1
-
Accounting Mode: Start-Interim-Stop
-
Accounting Packet: ticked
-
Interim Update Interval: 1800 seconds
-
-
Advanced Settings
-
NAS-Identifier: AP MAC address with capital letters and colon
-
Dynamic Authorization: ticked
-
Dynamic VLAN: ticked
-
Called Station ID: AP-MAC:SSID
-
-
Omaya 3.0 Administrator > Quick Setup > Dashboard
Documentation
Kiwire 3.0 Administrator - Devices & Configuration
Configuration - Role
The role module let you to create a role and access privileges to modules within Kiwire system. You can create either full access administrator or lower privileges administrator access as required. The navigation menu listing will based on the access the role have assigned. To access the role module click on Configuration > Role from the navigation. On the role listing module, you may search for specific role by using the search field.
The field and its function description is listed below.
ADD NEW ROLE
Click on “Add Role” button and populate the required fields. Fill in the field with relevant information to complete the process.
The field and its function description is listed below.
How to create role & assign administrator to it?
-
Click on the “Add Role” button.
-
Enter the role name for the new role.
-
Select the relevant modules that the group can access by checking on the module checkbox.
-
Click on the “Create” button to save the new role.
-
The role is now ready to assign to a new administrator.
-
Go to administrator module, create a new administrator with role assign to it.
EDIT OR DELETE ROLE
Click the edit icon on the role listing screen to edit a role. The edit screen be display which you can edit the setting of the role. Click on the delete icon to delete the role. A prompt will be display to ask for your confirmation to proceed to delete the role. Please exercise with cautions as this not a reversible action.