Kiwire 3.0 Administrator - Device & Controller Setup Guide
Kiwire 3.0 Administrator - Device & Controller Setup Guide
Cambium Networks Configuration for Kiwire Hotspot
Cambium Networks Configuration for Kiwire Hotspot
Prerequisites
Before integrating the controller with Kiwire, it is necessary that the controller and access point:
-
are connected to the Internet
-
are reachable on the network
-
have an IP address assigned to the a through DHCP or static
Note:
-
Kiwire-hostname or Kiwire-ip can be obtain by contacting our technical support for our cloud customer. For enterprise client the ip will be on premises Kiwire ip address.
-
Social network hostname list can be obtained from Social network whitelist guide
Part 1: Cambium cnMaestro configuration
-
Login to your Cambium cnMaestro controller
-
Go to WLANs > Configuration > AAA Servers
-
Authentication Server
-
Host: Kiwire-hostname or Kiwire-Ip
-
Secret: create a secret pass phrase
-
Port: 1812
-
Timeout: 3 seconds
-
Attempts: 1
-
-
Accounting Server
-
Host: Kiwire-hostname or Kiwire-ip
-
Secret: secret same as authentication server
-
Port: 1813
-
Timeout: 3 seconds
-
Attempts: 1
-
Accounting Mode: Start-Interim-Stop
-
Accounting Packet: ticked
-
Interim Update Interval: 1800 seconds
-
-
Advanced Settings
-
NAS-Identifier: AP MAC address with capital letters and colon
-
Dynamic Authorization: ticked
-
Dynamic VLAN: ticked
-
Called Station ID: AP-MAC:SSID
-
-
Omaya 3.0 Administrator > Quick Setup > Dashboard
Documentation
Kiwire 3.0 Administrator > Devices & Configuration > Project Mapping
Kiwire 3.0 Administrator - Devices & Configuration
Devices - Project Mapping
The project module let you create project and restrict project based on the zones selected. The navigation menu listing will based on the project the zone have assigned. To access the project module click on Devices > Project from the navigation. On the project listing module, you may search for specific project by using the search field.
The field and its function description is listed below.
ADD NEW PROJECT
Click on “Add Project” button and populate the required fields. Fill in the field with relevant information to complete the process.
.png)
The field and its function description is listed below.
EDIT OR DELETE PROJECT
Click on the edit icon, the edit screen displays in which you can edit the setting of the project. Click on the delete icon to delete the project. A prompt will be displayed to ask for your confirmation to proceed to delete the project. Please exercise with caution as this, not a reversible action.